JUHOR DDR4 8GB 16GB 3200MHz DIY Desktop Computer Memory Ram

1.This link does not support x99 and x79 series motherboards.2.XMP 2.0 is an optimization technology used by Intel on DDR4,It can automatically overclock. Just open XMP function in the BIOS,So that could get the idealperformance setting.Memory products with a frequency of 3000MHZ and higher than 3000mhz , which are not using the J.E.D.E.C. standard, which are with the X.M.P. standard. Please check whether the motherboard and CPU support X.M.P. before purchasing.3.If the motherboard and CPU don' t support the change standard,the memory will can only work at 2666MHz/2400MHz.In addition, due to the CPU and motherboard’s problems, for 3000MHz and above frequency 3000mhz memory, if you two pieces single channel memory or four combinations together , it may not be able to form a two-channel or multi-channel, without the original manufacture’s test, you can mix and match personally , there may be mismatch and can’t work in right way .4. High-frequency memory runs faster than low-frequency memory. With other hardware support, performance-seeking users can choose high-frequency memory a better experience. However, please note that if two or more memory modules of different frequencies are used simultaneously, the motherboard will automatically synchronize to the lower frequency.For example: When 2400MHz and 2666MHz are used together, the motherboard will automatically run at 2400MHz to achieve operational stability. The BIOS or diagnostic program usually reports the memory bus frequency, which is half of the frequency for DDR type memory. DDR (Double Data Rate) data rate provides twice the memory bus frequency. Therefore, if the memory bus speed is 1600MHz and you are using DDR4-3200 memory, the RAM is running at the correct speed.Please download the latest version of BIOS and other software. If you are using an older version, there may be data discrepancies. Product appearance damage caused by natural disasters, accidents, force majeure events, or poor storage conditions; 2. Malfunctions not attributable to the product itself due to improper human operation (e.g., use beyond the designed scope, use as fixtures, or for insertion/removal testing) or improper installation (e.g., plugging/unplugging while powered on, powering on without proper installation, or use on equipment incompatible with Jiuhe product specification s);3. IC chip damage, scratches, or detachment;4. PCB circuit board damage, scratches, or fractures;5. Damage or detachment of internal components such as capacitors, resistors, or resistance grids due to external forces; 6. Failure to power on caused by EPROM damage; 7. Damage or alteration of original labels or anti-counterfeiting labels, or unauthorized removal/damage of heat sinks; 8. Memory damage resulting from improper disassembly/assembly, unauthorized repairs, or unauthorized modification of memory SPD parameters.Memory Purchase Tip1. Due to varying factory batches, PCB boards of the same model: may differ in color and width. Howev